Skip to content

A CLEARER WAY TO WORK IT OUT

Concrete Calculator

A concrete estimate begins with the shape and dimensions of the space to be filled. This calculator turns those measurements into a volume, then adds the allowance you choose for planning a material quantity.

A concrete estimate begins with the shape and dimensions of the space to be filled. This calculator turns those measurements into a volume, then adds the allowance you choose for planning a material quantity.

Your result will appear here.

Your calculation runs in this browser. After changing a value, select Calculate to update the answer.

Your inputs stay in this browser. Change a value, then calculate again to update the result.

How to use the concrete calculator

The shape determines whether you need length and width or a diameter. All dimensions use metres. The optional allowance increases the geometric volume, and bag yield connects that volume to the product quantity you are comparing.

Measure the physical shape and convert all dimensions to metres before entering them. Slab thickness is often supplied in millimetres, so a value of 100 mm becomes 0.1 m rather than 100 m. The geometric volume describes the shape; the allowance adds the percentage you choose for ordering. Bag yield must come from the product specification because a bag’s dry weight alone does not specify its finished volume.

What the result tells you

The geometric volume is the shape’s calculated size. The order volume includes your allowance, and the bag count rounds up to a whole bag.

A calculation you can check

A 4 m by 3 m slab, 0.1 m deep, needs 1.2 m³ geometrically. With 10% allowance this becomes 1.32 m³, or 66 bags if each yields 0.02 m³.

Try it in the calculator ↑

Formula and calculation method

Slab volume = length×width×depth. Cylinder volume = π(diameter/2)²×height. Order volume = geometric volume×(1+allowance/100). Bags = round up(order volume/bag yield).

Check the assumptions

Depth is easy to overlook: a slab 10 centimetres deep is 0.1 metres deep. This quantity estimate does not determine mix strength, reinforcement or structural suitability.

A quantity estimate only; this does not design structural concrete or determine reinforcement, mix strength or building-code compliance. Bag yield varies by product and mixing conditions. Choose a realistic allowance for the job.

Frequently asked questions

Why does the tool round the number of bags up?

A fraction of a bag may be mathematically sufficient, but buying whole bags means rounding the required count upward. The specified yield determines the conversion.

Does it estimate reinforcement or structural safety?

No. It estimates volume and bag quantity for the entered geometry. Reinforcement, loading, mix specification and structural design require separate information.

Something looks wrong? Send the calculator name and a non-sensitive example so the issue can be checked.