Everyday calculations and advanced scientific tools, in one place.
Calculator is off. Select ON to resume.
Step-by-step guideCalculator function shortcuts · SHIFT
Secondary functions are available directly through buttons and modes.
Step-by-step evaluation
This shows numerical evaluation, not algebraic proofs. Displayed intermediate values are rounded; calculations retain full browser precision.
Recent calculations · reuse an expression
Last 10 calculations in this page session. Reloading clears history and memory.
Expression syntax reminder
Use parentheses with functions: sin(30) = 0.5 in DEG. In RAD, sin(pi/2) = 1. Multiplication precedes addition: 2+3*4 = 14. Powers associate to the right: 2^3^2 = 512. A percentage divides its value by 100; 100+10% = 100.1. Use 100*(1+10%) for a 10% increase. Factorials accept integers 0–170.
Enter * between a number and a function or constant. Browser floating-point results are rounded to 14 significant digits; tiny rounding differences are possible. Standard expressions support finite real numbers. Use Complex numbers mode for complex arithmetic. Changing the angle unit clears the displayed result; calculate again with the selected angle unit.
Advanced functions and limits
Choose a calculation mode above for CALC, numerical derivatives, definite integrals, bounded root solving, summation, polynomial equations, linear systems, matrices, vectors, complex arithmetic, base conversion, statistics, regression, coordinates, DMS, units and constants.
Use log(8,2), root(32,5), ncr(10,3), npr(10,3), sinh(1), round(1.234,2), randint(1,6), ans and m in expressions. Separate arguments with commas. Powers and functions require explicit multiplication. GRAD uses 400 gradians per full turn.
Derivatives and integrals are numerical approximations for finite, smooth real functions. Root solving finds one real root in a sign-changing interval. Matrices and linear systems support 2×2 and 3×3. Statistics supports up to 1,000 values; summation up to 10,000 terms. S↔D displays a rational approximation with a denominator up to 1,000,000. Use the separate fraction calculator for exact fraction arithmetic.
Physical constants: NIST defining SI constants. CALC accepts stored A–F, X, Y, M and named variables. Uppercase E uses its register; lowercase e is Euler’s constant. Use 2+(1/3) for a mixed fraction. DRG▶ converts angle values; DEG/RAD/GRAD selects how trigonometry is evaluated. ENG shifts the displayed exponent by three. CLR resets registers, Ans, history and settings. OFF hides the calculator and ON resumes it.
Step-by-step guide
Choose a language, then expand the topic you need.
English · detailed instructions
Start with Standard calculation, DEG and Normal. Type 2+3*4 in Calculation and press Enter for 14. Expand a topic below for exact input labels and worked examples.
1. Start here: your first calculation
- Calculation mode: select Standard calculation. Angle unit: DEG. Result notation: Normal.
- Select the Calculation box and type 2+3*4.
- Press Enter or the = button. The answer is 14.
- Expand Step-by-step evaluation to see multiplication followed by addition.
Use * for multiplication and / for division. Put an operator between values: 2*pi, not 2pi. Buttons insert text at the cursor; typing the whole expression is also supported.
2. Powers, roots and logarithms
- Keep Standard calculation selected. Type any example below in Calculation.
- Press Enter. For a button such as √, the inserted text is sqrt(; type the value and closing ) before calculating.
Functions require parentheses. Separate multiple arguments with commas. Powers associate right: 2^3^2=512; -2^2=-4, while (-2)^2=4.
3. Trigonometry and angle units
- For degrees, choose Angle unit DEG. Type sin(30) and press Enter for 0.5.
- For radians, choose RAD. Type sin(pi/2) and calculate for 1.
- Inverse sine is asin: in DEG, asin(0.5) returns 30. Changing Angle unit clears the result; calculate again.
DEG: 360 per turn. RAD: 2*pi per turn. GRAD: 400 per turn. Use asin/acos/atan for inverse trig and sinh/cosh/tanh/asinh/acosh/atanh for hyperbolic functions. These buttons are under More scientific functions.
4. Fractions and mixed numbers
- In Standard calculation, enter 7/3 and calculate.
- Expand More scientific functions. Select S↔D to switch decimal/fraction display. Select a b/c ↔ d/c to switch improper/mixed fraction display.
- For exact arithmetic, choose Calculation mode Exact fraction arithmetic. Enter Fraction A=1/2, Operation=A + B, Fraction B=1/3. Select Calculate for 5/6.
Do not type a mixed number as 2 1/3 in the standard expression. Use 2+(1/3). Standard S↔D is a rational approximation; Exact fraction arithmetic preserves exact numerator/denominator operations.
5. Percentages, factorials, combinations and randomness
- Use Standard calculation and type an example below.
- Expand More scientific functions to find nPr, nCr, Rnd, Ran# and RanInt. Multi-argument functions need a comma.
100+10% gives 100.1, not 110. Factorial accepts whole numbers 0–170. nPr uses order; nCr does not. Random values change each time you calculate.
6. Ans and stored variables
- Calculate 12*5 for 60. Replace the expression with ans/3 and calculate for 20.
- To store A, calculate 5^2. Select A in Variable / memory register · ALPHA, then select STO.
- Replace the expression with A*4 and calculate for 100. RCL inserts the selected register name.
Uppercase E is the stored variable; lowercase e is Euler’s constant. For new calculations use stored values in expressions with explicit multiplication. CLR resets Ans and all registers.
7. Substitute values: CALC
- Calculation mode: Substitute values · CALC.
- Expression: a*x+y. Variables (name=value; …): a=2; x=3; y=4.
- Select Calculate. The result is 10.
Separate assignments with semicolons; enter variable=value for each. Already stored registers are available. Explicit assignments replace their values for this calculation. Constant names such as pi are reserved; uppercase E remains a register.
8. Numerical derivative, integral and SOLVE
- Derivative: choose Numerical derivative. f(x)=x^3, Point x=2. Select Calculate for approximately 12.
- Integral: choose Definite integral. f(x)=x^2, Lower bound=0, Upper bound=1. Calculate for approximately 1/3.
- Solve: choose Solve f(x) = 0. For x²=2, enter f(x)=x^2-2, Lower bound=0, Upper bound=2. Calculate for approximately 1.4142135623731.
Enter the function with x and explicit multiplication. For SOLVE, move everything to the left so the expression equals zero; do not type an equals sign. The solver finds one real root inside a sign-changing interval. Derivatives and integrals are numerical approximations of smooth, finite real functions.
9. Summation and a table of values
- Summation: choose Finite summation · Σ. Term in x=x^2, First integer x=1, Last integer x=10. Calculate for 385.
- Table: choose Table of values. f(x)=x^2, Start x=-2, End x=2, Step=1. Calculate.
- Read the x and f(x) columns; for x=-2,-1,0,1,2 the values are 4,1,0,1,4.
Summation bounds are whole numbers and include both ends. Table Step is the interval, not the number of rows; use a negative step for a descending range. Tables allow up to 200 rows and sums up to 10000 terms.
10. Polynomial and simultaneous equations
- Polynomial equation: choose Degree=quadratic. For x²−3x+2=0, enter Coefficient a=1,b=-3,c=2. Select Calculate. Roots are 1 and 2 (order may differ).
- For cubic, choose cubic and enter coefficients a,b,c,d in a*x³+b*x²+c*x+d=0.
- Simultaneous linear equations: enter one row per equation, coefficients first and right-hand value last. Use the two rows below and calculate for x=2,y=1.
Use actual line breaks between equation rows. Include zero coefficients for missing variables. A three-variable system needs three rows with four numbers each. A singular or ill-conditioned system is rejected.
11. Matrices, vectors and complex numbers
- Matrix · 2×2 or 3×3: choose A × B. Matrix A has rows 1,2 and 3,4. Matrix B has rows 5,6 and 7,8. Use a line break between rows. Calculate for rows 19,22 and 43,50.
- Vector · 2D or 3D: choose Dot product. Vector A=1,2,3 and Vector B=4,5,6. Calculate for 32.
- Complex numbers: choose multiply. Real A=3,Imaginary A=4,Real B=1,Imaginary B=-2. Calculate for 11−2i.
Matrix operations also include determinant, inverse and transpose. Vector length and unit vector need only A; a cross product needs 3D. Complex entries are separate real and imaginary coefficients; do not type 3+4i into Real A. Standard expressions support real values; use the complex mode for these operations.
12. Statistics, regression and BASE-N
- Statistics: enter Values=2,4,4,4,5,5,7,9 and Calculate. Mean=5 and Population standard deviation=2.
- Linear regression · y = a + bx: enter one x,y pair per line, using 1,2 then 2,4 then 3,5. Calculate for slope b=1.5 and intercept a≈0.6666667.
- BASE-N · exact integers: Input base=Hexadecimal, Operation=convert, Integer A=FF. Calculate; Decimal is 255.
Sample variance/standard deviation need at least two data values. Regression r is correlation, b the slope, a the intercept. Binary digits are 0 or 1 only. Choose AND/OR/XOR/XNOR for two-integer logical operations; NOT and NEG use A only. BASE-N uses signed arbitrary-size integers rather than a fixed bit width.
13. Coordinates, DMS and angle conversion
- Polar / rectangular coordinates: choose Rectangular x,y → polar r,θ. Enter x or radius r=3 and y or angle θ=4. With DEG, Calculate gives r=5,θ≈53.1301°.
- Degrees / minutes / seconds: select Decimal degrees → DMS and enter Decimal degrees=12.5. Calculate for 12°30′0″. For the reverse, enter whole degrees,minutes,seconds separately.
- Angle conversion · DRG▶: Angle value=180,From angle unit=DEG,To angle unit=RAD. Calculate for pi≈3.14159265.
In coordinate reverse mode, the first field is radius and second is angle in Angle unit. DMS minutes and seconds must be at least 0 and less than 60. Use −0 degrees for a negative DMS angle below 1 degree. DRG converts a value; Angle unit changes how trig functions interpret their input.
14. Units and scientific constants
- Unit conversion: choose Quantity=length,From=Meters,To=Feet,Value=1. Select Calculate for approximately 3.280839895 feet.
- Choose the quantity before units; temperature uses offsets rather than simple scaling.
- Scientific constants: choose a Constant and select Calculate. Read its expression token in Method and calculation to reuse it in a standard expression, for example c0/1000.
Use the units shown beside or in the selected quantity. Do not insert a unit symbol into a numeric field. pi and e use browser precision; measured physical constants may have experimental uncertainty.
15. Display, editing and reset buttons
- Choose Result notation=Fixed decimal, then set Digits (fixed decimal places) to the number of digits you want. This changes display, not the underlying value.
- Calculate 12345, then press ENG to shift the displayed exponent by 3; ← ENG shifts it back.
- Use cursor arrows to edit inside the expression. INS switches insert/overwrite; ↑ Replay and ↓ Replay reuse recent expressions.
More scientific functions exposes secondary buttons; Calculator function shortcuts · SHIFT opens modes directly. In an advanced mode, Try example restores that mode’s example and calculates it; Reset restores its example inputs. Check input units and recalculate after every change.
Inputs stay in your browser. No sign-up needed.